New Arrivals:

Ref # Manufacturer Model Year
24646 Husky 1815-407 1999
24613 Van Dorn 1100-139 1999
24611 Van Dorn 1100-139 2000
24631 Van Dorn 880-89.6 2001
24634 Van Dorn 880-59 2001
24642 Van Dorn 730-59 2001
24420 Nissei 618-106 1997
24404 Van Dorn 500-59.2 2000
24402 Cincinnati-Milacron 500-54 1995
23404 Toshiba 500-32 2001
24411 Toyo 200-6.70 1999
24298 Cincinnati-Milacron 275-10.57 2011
22543 JSW 198-9.6 1999
23471 Netstal 150-3.49 1999
23452 Minarik 0099125 2006
23441 Cincinnati-Milacron STNP/LK20-40T20 x
24006 Universal UCS-05A 2014
24003 Universal UCS-10A 2014
24330 Cincinnati-Milacron T3000W 2001
24319 Borche BS120 2014
23521 Cincinnati-Milacron 120-4.44 2000
22757 Kase KSP 612W 1986
22758 Kase KSP 612W x
22758 Kase KSP 612W x
Inventory #24646

1815 Ton, 407 Oz. Husky Injection Molding Machine
Model: EWL1650-RS170/155 New: 1999
*** Wide Platen ***
Platen Size ....................... 99.20" x 83.50"
Distance Between Tie Bars ......... 70.86" x 55.20"
Daylight ..................................... 143"
Clamp Stroke ............................... 107.6"
Min/Max Shut Height ................... 35.4"/71.7"
Min/Max Mold Height .................. 35.43"/75.6"
Ejector Stroke ................................. 11"
Equipped With:
Xycom 9660 Control
407 Oz. Injection Unit
Core Pull
Air Blow
460 Volts
Hydraulic Knockouts
Price: $$Call
Richard Stone/Richard Todd
email: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24613

1100 Ton, 139 Oz. Van Dorn Injection Molding Machine
Model: 1000HP-6800 Year: 1999
Platen Size ........................ 65.00" x 65.00"
Distance Between Tie Bars .......... 44.00" x 44.00"
Open Daylight (Max) ........................... 92"
Mold Thickness (Min) .......................... 12"
Ejector Stroke ................................ 8"
Machine Dimensions ........ 39.2'L x 8.4'W x 11.3'H
Machine Weight ....................... 135,000 Lbs.
Equipped with:
Increased Clamp Tonnage
Pathfinder 3000 Control
139 Oz. Injection Unit
Core Pull
SPI Robot Interface
Motion/No Motion
Two-Stage Air Eject
Plug In Nozzle & Adaptor Heater Bands
Pneumatic Mold Gate
Relays - 6 for mold switches
EJ - Forward Switch At Normally Closed
4" Location Ring
Ejector Complete Signal
Hopper/Feeder w/Magnetic Base
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24611

1100 Ton, 90 Oz. Van Dorn Injection Molding Macine
Model: 1000HP-4300 Year: 2000
**** Wide Platen ****
Platen Size ....................... 59.00" x 66.00"
Distance Between Tie Bars ......... 52.00" x 44.00"
Open Daylight (Max) ......................... 75.8"
Mold Thickness (Min) ........................ 23.6"
Clamp Stroke (Max) .......................... 52.2"
Ejector Stroke ................................ 7.9"
Equipped with:
Wide Platen Design
Increased Clamp Tonnage
Pathfinder 3000 Control
90 Oz. Injection Unit
Core Pull
SPI Robot Interface
Motion/No Motion
Two-Stage Air Eject
Plug In Nozzle & Adaptor Heater Bands
Pneumatic Mold Gate
Relays - 6 for mold switches
EJ - Forward Switch At Normally Closed
4" Location Ring
Ejector Complete Signal
Hopper/Feeder with Magnetic Base
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24631

880 Ton, 89.6 Oz. Van Dorn Injection Molding Machine
Model: 880SP-4300 Year: 2001
Platen Size ....................... 59.00" x 66.00"
Distance Between Tie Bars ......... 46.30" x 39.40"
Open Daylight (Max) ......................... 75.8"
Mold Thickness (Min) ........................ 23.6"
Clamp Stroke (Max) .......................... 52.2"
Ejector Stroke ................................ 7.9"
Equipped with:
Increased Clamp Tonnage
Pathfinder 3000 Control
89.6 Oz. Injection Unit
Motion/No Motion
Two-Stage Air Eject
Plug In Nozzle & Adaptor Heater Band
Pneumatic Mold Gates
Relay - 6 for mold switches
EJ - Forward switch at Normally Closed
4" Locating Ring
Ejector Complete Signal
Core Pull
SPI Robot Interface
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24634

880 Ton, 59 Oz. Van Dorn Injection Molding Machine
Model: 880SP-2800 New: 2001
Platen Size ........................ 53.50" x 53.50"
Distance Between Tie Bars ........ 46.30" x 39.40"
Clamp Stroke ................................... 44"
Maximum Daylight ........................... 72-3/4"
Minimum Mold Thickness ......................... 16"
Tie Rod Diameter ............................ 6-1/2"
Ejector Stroke .................................. 6"
Screw Diameter ................................ 80mm
Equipped With:
Increased Clamp Tonnage
Pathfinder 3000 Control
59 Oz. Injection Unit
Core Pull
Pneumaic Mold Gate Control
Hi Waer Screw and Bimetallic Barrel
Power Capacitor
Pump Motor Lockout
EJ Complete Signal
SPI Robot Interface
Hopper/Feeder w/Magnetic Base
Price: $$Call
Richard Todd/Richard Stone
e-mail: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24642

730 Ton, 59 Oz. Van Dorn Injection Molding Machine
Model: 730SP-2800 New: 2001
Platen Size ........................ 53.50" x 53.50"
Distance Between Tie Bars ........ 46.30" x 39.40"
Clamp Stroke ................................... 44"
Maximum Daylight ........................... 72-3/4"
Minimum Mold Thickness ......................... 16"
Tie Rod Diameter ............................ 6-1/2"
Ejector Stroke .................................. 6"
Screw Diameter ................................ 80mm
Equipped With:
Increased Clamp Tonnage
Pathfinder 3000 Control
59 Oz. Injection Unit
Pneumatic Mold Gate Control
Hi Wear Metallic Screw & Bimetallic Barrel
Power Capacitor
Pump Motor Lockout
EJ Complete Signal
Core Pull
SPI Robot Interface
Hopper/Feeder w/Magnetic Base
Price: $$Call
Richard Todd/Richard Stone
e-mail: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24420

618 Ton, 106 Oz. Nissei Injection Molding Machine
Model: FV9000-310L Year: 1997
Platen Size ........................ 53.50" x 53.50"
Distance Between Tie Bars .......... 38.20" x 38.20"
Mold Thickness (Min/Max) ............... 15.7"/35.4"
Max Daylight ................................. 71.2"
Mold Clamping Stroke ......................... 35.4"
Ejector Stroke ................................ 7.1"
Machine Dimensions ..... 383.80'L x 83.10'W x 88.8'H
Machine Weight .......................... 65,036 Lbs
Broken Down: 39,100lbs.Clamp / 26,100lbs Inj. Unit
Equipped with:
NC9300T Control
106 Oz. Injection Unit (90mm Screw)
40kw Heater
45kw Motor
230/460 Volts
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24404

500 Ton, 59.2 Oz. Van Dorn Injection Molding Machine
Model: 500HT-2800 Year: 2000
Platen Size: ....................... 47.80" x 47.80"
Distance Between Tie Bars .......... 32.50" x 32.50"
Max Daylight .................................. 61"
Min Mold Height ................................ 10"
Max Clamp Stroke ............................... 30"
Ejector Force ............................ 12.5 Tons
Ejector Stroke .................................. 6"
Screw Diameter ............................... 3.15"
LD Ratio ...................................... 20:1
Dimensions .................... 29.1'L x 6.3'W x 9'H
Weight .................................. 51,200 Lbs
Equipped with:
Pathfinder 3000
59.2 Oz. Injection Unit
Core Pull
Motion/No Motion
460 Volts
Equipped with: Technical Information and/or Manual
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24402

500 Ton, 54 Oz. Cincinnati Milacron
Injection Molding Machine
Model: VH500-54 Year: 1995
Platen Size: ....................... 48.00" x 48.00"
Distance Between Tie Bars .......... 34.30" x 34.30"
Daylight .................................... 55.1"
Clamp Opening Force ....................... 34.7 Ton
Clamp Stroke ................................. 40.2"
Min. Mold Height ............................... 15"
Tie Rod Diameter ............................. 5.51"
Ejector Force ............................ 12.5 Tons
Screw Diameter ............................... 3.15"
Screw LD Ratio ................................ 20:1
Machine Dimensions ...... 351.5"L x 75.9"W x 108.5"H
Machine Weight ......................... 50,000 Lbs.
Equipped with:
Camac 486 Control
54 Oz. Injection Unit
Core Pull
Robot Interface
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #23404

500 Ton, 32 Oz. Toshiba Electric
Injection Molding Machine
Model: EC500-V21-26Y New: 2001
Platen Size ........................ 48.40" x 45.70"
Distance Between Tie Bars .......... 34.20" x 31.90"
Clamp Stroke .................................. 32"
Mold Height (Min/Max) .................. 13.8"/29.5"
Daylight ...................................... 61"
Ejector Stroke ................................ 7.1"
Screw Diameter ............................... 2.36"
Screw Stroke ................................. 13.8"
Dimensions .................... 28.6'L x 7'W x 8.3'H
Weight ................................. 60,500 Lbs.
Equipped with:
- V21 Control
- 32 Oz. Injection Unit
- Standard DBG Screw and Bimetallic Barrel
- Heaterband Failure Indicator
- RS 232 Printer Port
- Alarm Light
- Dual Air Blow
- Auto Purge Circuit
- Core Pull Electrical Program
- Mold Valve Gate Air Single Zone
- Mold Ejector Plate Monitor
- Data Change Lock Out Key
- Transformer for 460 Volt to 208
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24411

200 Ton, 6.70 Oz. Toyo Electric
Injection Molding Machine
Model: Si-200 Year: 1999
Platen Size ........................ 30.71" x 30.71"
Distance Between Tie Bars .......... 22.05" x 22.05"
Min. Daylight ............................... 7.87"
Min./Max. Mold Size .................. 19.69"/38.19"
Max. Pressure ........................... 31,284 PSI
Dimensions ..................... 211"L x 52"W x 70"H
Equipped with:
PLCS-9s Control
6.70 Oz. Injection Unit
2 Core Pull Sequences (Wired Only)
2 Air Blow Circuits
Changeable Nozzle Adaptor
Mold Close Inhibit
Wired for an E-Dart
New SFM Screw, Barrel and Check Ring 4/2010
230 Volts
Operations Manual
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com

Enter your email address to receive more information:

Inventory #24298

275 Ton, 10.57 Oz. Cincinnati Roboshot
Electric Injection Molding Machine
Model: S-2000i 275B-300G Year: 2011
Platen Size ....................... 40.60" x 37.80"
Distance Between Tie Bars ......... 28.00" x 25.00"
Clamp Stroke ................................ 23.62"
Maximum Daylight ............................ 49.21"
Minimum Mold Thickness ...................... 11.80"
Maximum Mold Thickness ...................... 25.60"
Ejector Stroke ............................... 7.87"
Dimensions: 251.1"L x 68.2"W x 82.8"H
Weight: 30,203 lbs.
Equipped with:
Fanuc 310iSA Control
10.57 Oz. Injection Unit
Eject Override Software
Melstor Barrier Mixing Screw
PECI Interface
Pneumatic Valves for Mold Gate
Core Set
208 Volts
Motan Loader
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #22543

198 Ton, 9.6 Oz. JSW Electric Injection
Molding Machine
Model: J200 ELII-300H Year: 1999
Type: Electric
Platen Size ....................... 30.71" x 30.71"
Distance Between Tie Bars ......... 20.87" x 20.87"
Screw Stroke ................................. 5.51"
Ejector Stroke ............................... 5.12"
Max Daylight Opening .......................... 37"
Mold Opening Stroke ........................ 17.32"
Maximum Mold Thickness ...................... 19.69"
Minimum Mold Thickness ....................... 8.66"
Dimensions .............. 18.08'L x 4.50'W x 6.30'H
Weight ................................. 9.6 US Tons
Equipped w/
Syscom-1000 Control
9.6 Oz. Injection Unit
Air Jet
Ejector Plate
Speed Throat Temp. Control
Pre-Heat Timer
Transformer
220/3/60
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com
** Actual photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #23471

150 Ton, 3.49 Oz. Netstal Injection Molding Machine
Model: Synergy 1500/230 Year: 1999
Distance Between Tie Bars .......... 20.13" x 20.13"
Max Daylight .................................. 28"
Mold Height ................................. 27.6"
Injection Stroke .............................. 7.38
Machine Weight ........................ 24,030 Lbs.
Equipped with:
DSP/2 Control
3.49 Oz. Injection Unit
Core Pull
Robot Interface
Accumulator on Injection End
50 HP
Main Motor - 480 Volts
Heater Bands - 230 Volts
Ranger Robot, Model: SPR90
Price: $$Call
Richard Todd/Richard Stone
email: sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #23452

Minarik Automation & Control
Vision - Part Inspection System
Model: 0099125
Year: 2006
Equipped with:
Fuse 1: EStop 1 Amp.
Fuse 2: Hopper Vibrate 5 Amps.
Fuse 3: Feeder Bowl Vibrator 15 Amps.
Fuse 4: Belt Drive 2 Amps.
Fuse 5: DRP-240-24 Control 3.5 Amps.
Fuse 6: Camera 3.5 Amps.
Also includes inline tract.
Previously Inspected: FLA (Female Luer Adapter)
** Wiring Schematics & Set-Up Instructions Included
Price: $$Call
Please contact:
Susan Bowman
email: sb@machinerycenter.com

Enter your email address to receive more information:

Inventory #23441

Milacron Barrel Separator
Model: STNP/LK-20-40-T20
* Part / Runner Separators Prepare Parts Quickly *
Volts: 115
Amps: 54
Control: Vari-Drive DC Motor Speed Control
The STN-LK drum separator sorts dissimilar-sized
parts a different way. The drum has holes throughout
its length that are sized to allow smaller parts
through the holes - everything else passes down to
the end of the process. Perforated holes can be
sized to meet specific application needs.
For hard to separate sprues, our specialized
perforated drum was developed to separate runners
that slip through the perforations by pivoting. The
addition of extensions on each hole, prevents the
runners from pivoting. Runners pass over the holes
and exit at the end of the drum. Parts are still
able to fall through the holes
Price: $$Call
Please contact:
Susan Bowman
email: sb@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24006

Universal Chilling Systems
Model: UCS-05A
Year: 2014
** Brand New in Showroom Condition **
Capacity: 4.17 Ton
Cooled: Air
Power Supply: 460/3/60
Copeland Compressor HP: 7.23
Fans: 1 / .89HP
Refrigerant: R407C
Approx Dims: 60"L x 34"W x 62"T
Approx Weight: 710lbs
Location: Miami, Florida
Price: $$Call
Please contact:
Susan Bowman
email: sb@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24003

Universal Chilling Systems
Model: UCS-10A
Year: 2014
** Brand New in Showroom Condition **
Capacity: 8.53 Ton
Cooled: Air
Power Supply: 460/3/60
Copeland Compressor HP: 13.94
Fans: 2 / .85HP
Refrigerant: R407C
Approx Dims: 72"L x 39"W x 68"T
Approx Weight: 960lbs
Location: Miami, Florida
Price: $$Call
Please contact:
Susan Bowman
email: sb@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24330

Cincinnati Milacron Accumulator Head Blow Molder
Model: T3000W-D120G-D35
Year: 2001
**Excellent Condition and Can be Seen Under Power **
Heads: Dual
Shot Size: 35lb
Clamp Force: 340 Tons
Platen: 82" x 72"
Daylight: 15.7"/74.8"
Extruder: (2) 120mm
HP: 300 each
Air Valves: 12
Core Valves: 2
Electrical: 480/3
Control: Camac 486
Price: $$Call
Please contact:
Susan Bowman
email: sb@machinerycenter.com
** Actual Photo(s0) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #24319

BRAND NEW 2014 BORCHE MACHINES
MCI REPRESENTING THE EASTERN SEABOARD!
120 Ton, 6 Oz. Borche
**Choice of Shot Size - 6, 8 OR 10 Oz.
Model: BS120 / Year: 2014
** 2 YEAR WARRANTY PARTS AND LABOR
** PRICE DELIVERED TO YOUR FRONT DOOR!
Clamping Force: 132 Tons
Platen Size: 24.01" x 24.01"
Tie Bar: 16.14" x 16.14"
Max Daylight: 31.10"
Mold Thickness: 5.70/17.51"
Ejection Stroke: 3.93"
Ejection Force: 3 Tons
Choice of Screw: 1.37", 1.57" or 1.77"
Choice of LD Ratio: 23.5, 20.5 or 18
Horsepower Pump: 15
Heating: 8.86 KW / Heater Zones: 4
Core Pull: 2 / Air Blow: 4
Controller: KEBA 2580
Equipped w/: 380V w/Transformer to Required Voltage;
SPI Platens and Interface, Nozzle Purge Guards; 3
Color Alarm, Water Manifolds; Anti-Vibration Level
Pads and Start Up by Borche North America
Dims: 14.75' x 4.50' x 5.58'
Weight: 7,716 lbs
Price: $$Call
Please contact:
Susan Bowman - sb@machinerycenter.com

Enter your email address to receive more information:

Inventory #23521

120 Ton, 4.44 Oz. Cincinnati-Milacron "Vista"
Injection Molding Machine
Model: Milacron Vista V120 Year: 2000
Hours: 46,754
Platen Size ...................... 26.38" x 26.38"
Distance Between Tie Bars ........ 17.13" x 17.13"
Open Daylight (Max) ........................ 32.48"
Screw Diameter ............................. 36mm
Equipped with:
Xtreem ST Control
4.44 Oz. Injection Unit
Core Pull
BiMetallic Barrel
Hopper Magnet
2 Stage Air Eject on Moving & Stationary Platens
Hydraulic Mold Gate
Closed Loop Feed Throat
Knockout Return Verification
460/3/60
Location: Midwest Facility
Price: $$Call
Richard Stone/Richard Todd
sales@machinerycenter.com
** Actual Photo(s) on www.machinerycenter.com **

Enter your email address to receive more information:

Inventory #22757

Kase Pail Printer
Model: KSP 612W
Year: 1986
*Electronic Pail Printer Manual Available*
*A dry offset printer designed to print four colors
on a container.
Color: 4
Style: 5 Gallon Pails
Max Height: 14" (355 mm)
Max Pail Height: 16" (406 mm)
Max Pail Diameter: 16" (406 mm)
HP: 5 w/variable speed drive
Transmission: Manually Shifted
Index: 1 Revolution 360D of the blanket cylinder
Index: 1/2 Revolution 180D on the blanket cylinder
Index: 1/4 Revolution 90D on the blanket cylinder
Features:
Pre-Treat System - Colors dry better
Flame Treated
Magnetic Plate Cylinder
6 Index Machine
Conveyor System
UV on Mandrel (dries right on machine)
Internal Vacuum System
Equipped with: Electronic Operators Manual
Location: Miami, Florida
Price: $$Call
Please contact:
Susan Bowman
email: sb@machinerycenter.com

Enter your email address to receive more information:

Inventory #22758

Kase Pail Printer
Model: KSP 612W
*Electronic Pail Printer Manual Available*
*A dry offset printer designed to print four colors
on a container.
Color: 4
Style: 5 Gallon Pails
Max Height: 14" (355 mm)
Max Pail Height: 16" (406 mm)
Max Pail Diameter: 16" (406 mm)
HP: 5 w/variable speed drive
Transmission: Manually Shifted
Index: 1 Revolution 360D of the blanket cylinder
Index: 1/2 Revolution 180D on the blanket cylinder
Index: 1/4 Revolution 90D on the blanket cylinder
Features:
Pre-Treat System - Colors dry better
Flame Treated
Magnetic Plate Cylinder
6 Index Machine
Conveyor System
UV on Mandrel (dries right on machine)
Internal Vacuum System
Equipped with: Electronic Operators Manual
Location: Miami, Florida
Price: $$Call
Please contact:
Susan Bowman
email: sb@machinerycenter.com

Enter your email address to receive more information:

Inventory #22758

Kase Pail Printer
Model: KSP 612W
*Electronic Pail Printer Manual Available*
*A dry offset printer designed to print four colors
on a container.
Color: 4
Style: 5 Gallon Pails
Max Height: 14" (355 mm)
Max Pail Height: 16" (406 mm)
Max Pail Diameter: 16" (406 mm)
HP: 5 w/variable speed drive
Transmission: Manually Shifted
Index: 1 Revolution 360D of the blanket cylinder
Index: 1/2 Revolution 180D on the blanket cylinder
Index: 1/4 Revolution 90D on the blanket cylinder
Features:
Pre-Treat System - Colors dry better
Flame Treated
Magnetic Plate Cylinder
6 Index Machine
Conveyor System
UV on Mandrel (dries right on machine)
Internal Vacuum System
Equipped with: Electronic Operators Manual
Location: Miami, Florida
Price: $$Call
Please contact:
Susan Bowman
email: sb@machinerycenter.com

Enter your email address to receive more information: